Medline Gravity Feeding Set with ENFit Connector

Item Code : -

Model No. : ENFIT70503

Alternate/Ref. Code : -

$1.00

Gravity sets designed for use in the absence of a feeding pump
For use with feeding tubes only, both funnel and ENFit types
Preattached stepped transition connector
Nonsterile

ENFIT70503

gravity feeding set Instructions for use and drip rate

This device is intended to dispense liquid nutrition (feeding solution) at a user controlled rate.

These enteral gravity sets connect with a patient’s feeding tube and use gravity to dispense feeding solution.

How to Use

1. Open package and remove set from pouch

2. Close roller clamp completely

3. Fill bag with desired quantity of nutrient

4. Close bag by securing cap

5. Hang bag at desired level

6. Remove cap from purple ENFit® transition connector

7. Open roller clamp, allowing nutrient to fill entire length of tubing, expelling air

8. Close roller clamp and replace tip protector

9. Connect feeding set to patient’s enteral feeding tube. Confirm the set is connected to an enteral port and NOT an IV port • For feeding tubes without the ENFit connection system, use pre-attached purple ENFit transition connector • For feeding tubes with the ENFit connection system, remove and discard pre-attached purple transition connector from set and screw set clockwise into feeding tube. Avoid over tightening

10. Slowly open roller clamp to establish desired drip rate. 11. Discard set when feeding is complete, or at least every